200 E Van Buren St Suite 1531, Phoenix, AZ 85004 Mon – Sun · 7:00 AM – 10:00 PM
(480) 520-3492
Phoenix Mold Remediation Elite logo
Phoenix Mold RemediationElite
 Call (480) 520-3492
Certified Mold Remediation Contractors

Phoenix Mold Remediation Elite

Mold Inspection · Containment · Removal · Clearance

Licensed, insured, and IICRC-certified mold remediation contractors for homes, restaurants, clinics, and small commercial buildings. Every project starts with a real moisture diagnosis and ends with verifiable, insurance-ready clearance documentation — never a quick spray and walk away.

  • IICRC AMRT Certified Contractors
  • Negative-Pressure Containment
  • Hidden-Cavity Moisture Diagnosis
  • Insurance-Ready Clearance Reports
Call (480) 520-3492 See Our Services
IICRC AMRT
Mold remediation contractor in full PPE installing containment barriers
14-Day Containment-to-Clearance Typical project window, start to finish
Visit Our Office

Drop in, get directions, or walk us through your project

You can stop by to drop off paperwork, pick up sample reports, or wait while a remediator comes out to look at photos with you. Easy on/off access from the I-10 and 7th Street.

Phoenix Mold Remediation Elite office storefront signage
Storefront
Phoenix Mold Remediation Elite branded office signage
Main Signage
Phoenix Mold Remediation Elite office entrance signage
Entrance
Address 200 E Van Buren St Suite 1531, Phoenix, AZ 85004 Get directions →
Hours Mon – Sun · 7:00 AM – 10:00 PM Call ahead: (480) 520-3492 →
Parking Street parking on E Van Buren and adjacent lots Find parking →
Inspection of water-damaged drywall and hidden mold HEPA-vacuuming of mold spores from a treated surface
Who We Are

A team built around doing it right the first time

Phoenix Mold Remediation Elite was founded by remediators who got tired of seeing rushed jobs come back six months later. Every project starts with a real moisture diagnosis — not a quick spray — and ends with third-party verifiable clearance documentation.

We work on single-family homes, condos, restaurants, clinics, and small commercial spaces. Whether it’s a recent water intrusion or stachybotrys behind a bathroom wall that’s been hiding for years, we handle it the way it should be handled.

Licensed & InsuredFull general liability + pollution coverage
IICRC AMRT CertifiedApplied Microbial Remediation Technicians
Containment FirstNegative-pressure zones to stop spread
Insurance-Ready DocsPhotos, moisture maps, scope, clearance
What We Do

Mold remediation, done methodically

From a single contaminated wall cavity to a whole-floor microbial event, every job follows the same disciplined protocol — inspect, contain, remove, dry, verify.

Mold remediation contractor running a moisture meter against a discoloured wall during inspection
Where Every Project Starts

Mold Inspection & Moisture Mapping

Thermal imaging, pinned moisture meters, and air sampling identify exactly where mold is growing — including hidden cavities behind drywall, under flooring, and inside wall assemblies. You get a written scope, photo log, and moisture map before any demolition starts.

  • Thermal camera survey of suspect zones
  • Pinned + pinless moisture readings on framing
  • Air & surface sampling (lab-analyzed) on request
  • Written diagnosis and remediation scope
Diagnose first, demolish second →
6-mil poly containment with negative-air machine being set up

Containment & Negative Air

6-mil poly barriers, decon chambers, and HEPA-filtered negative-air machines keep spores from migrating into clean parts of the building.

Stop the spread →
Stachybotrys treated on exposed wall studs after drywall removal

Black Mold Removal

Affected drywall, insulation, and porous materials are double-bagged and disposed. Studs and framing are HEPA-sanded and antimicrobial-treated.

Source removal →
Black mold removal inside a bathroom around the tub and tile

Bathroom & Wet-Room Mold

Behind tile, under tubs, inside vanity walls — the wet-room mold pattern is predictable. We rebuild the moisture barrier so it doesn’t come back.

Wet-room specialty →
Below-grade space being remediated for mold growth

Basement & Below-Grade

Hydrostatic moisture and stagnant air make below-grade spaces a mold magnet. We treat the surface and engineer the airflow to keep it dry.

Long-term fix →
Attic mold growth on roof sheathing being inspected

Attic Mold Treatment

Bath-fan venting, soffit blockage, and bypasses drive most attic mold. We treat the sheathing and fix the underlying ventilation defect.

Ventilation included →
Ceiling water stain and mold inspected from below

Ceiling Stains & Roof-Leak Mold

That brown ring isn’t just a stain — it’s a colony. We work with your roofer on the leak source, then remediate the cavity above the ceiling.

Source & surface →
Our Process

Four steps from concern to clearance

Every job runs on the same disciplined sequence — no shortcuts on containment, no shortcuts on verification.

Inspect & Test

Visual + moisture + thermal survey. Air or surface samples if needed for documentation.

Contain & Protect

Poly walls, floor protection, negative air. The work zone is isolated from the clean zone.

Remove & Treat

Affected material out. Surfaces HEPA-vacuumed, sanded if structural, antimicrobial applied.

Verify & Document

Post-remediation clearance test, photographic record, and full scope-of-work delivered.

The Phoenix Mold Remediation Elite team at the office
The Team

Trained, certified, and on the same job from start to clearance

You won’t get one estimator and a different crew that doesn’t know the file. The same lead remediator who scopes your job runs it through clearance — every project, every time.

Every technician on the team holds active IICRC certifications and trains internally every quarter on the latest containment and clearance protocols.

  • IICRC AMRT Certified
  • EPA RRP-Lead Compliant
  • OSHA 30 Trained Crews
  • Insurance-Carrier Friendly
  • Pollution-Liability Insured
  • Background-Checked Techs
Field Photos

Real jobs, real conditions

Not stock photography. These are recent projects — drywall, framing, ducting, and clearance work in homes and small businesses.

Baseboard removed exposing mold-damaged drywall Sealed baseboard line after mold prevention treatment HEPA vacuuming mold residue from a treated surface Wall studs treated for black mold Attic sheathing inspected for mold Ceiling stain being inspected for water and mold damage
Get In Touch

Reach a remediation contractor directly

Send photos, ask about scope, or schedule a moisture survey. A certified remediator reviews every inquiry — most are answered live, the rest returned the same business day.

Office200 E Van Buren St Suite 1531, Phoenix, AZ 85004
HoursMon – Sun · 7:00 AM – 10:00 PM